Key Points
- Bentley Motors and its strategic supply partner, ZF Foxconn Chassis Modules (ZFFCN), have begun construction of a dedicated axle assembly facility at Chatterley Park in Stoke-on-Trent.
- The new facility will exclusively manufacture complete front and rear axle systems for future Bentley vehicles.
- Located approximately 17 miles from Bentley’s headquarters and manufacturing site, known as the Dream Factory, in Crewe, the development aims to bring critical component manufacturing closer to vehicle production.
- Production is scheduled to begin in 2027, with complete front and rear suspension modules delivered directly to Bentley’s production lines through a just-in-sequence manufacturing model.
- The facility will support internal combustion engine, plug-in hybrid and battery electric vehicle programmes.
- Bentley sees the development as an important step towards establishing a more localised UK supplier network, including its ambition to develop a future supplier park closer to Crewe.
- ZF Foxconn Chassis Modules is a 50:50 joint venture between Germany’s ZF Friedrichshafen and Taiwan-based Foxconn, established in 2024.
- The supplier operates 27 locations worldwide and employs more than 4,000 people, according to Automotive Manufacturing Solutions.
- The development forms part of Bentley’s wider Beyond100+ transformation and its £2.5 billion investment commitment in future products and manufacturing infrastructure.
- Bentley’s manufacturing strategy is evolving to accommodate petrol-powered, hybrid and fully electric vehicles as the luxury carmaker responds to changing market conditions and customer demand.
Why Are Bentley and ZF Foxconn Expanding Automotive Manufacturing in the UK?
Bentley Motors is strengthening its British manufacturing and supply chain operations through a new dedicated axle assembly facility being developed by its strategic supplier, ZF Foxconn Chassis Modules, in Stoke-on-Trent. Construction has started at Chatterley Park, with the facility expected to begin production in 2027 and supply complete front and rear axle systems exclusively for future Bentley vehicles.
As reported by Nick Holt, editor of Automotive Manufacturing Solutions, in his article published on 16 November 2026, the development represents an important step in Bentley’s plans to establish a more localised manufacturing and supplier network in the United Kingdom.
The new facility will be situated approximately 17 miles from Bentley’s headquarters and manufacturing operations in Crewe, Cheshire. Its proximity is intended to strengthen the relationship between component manufacturing, logistics and final vehicle assembly.
The project will be operated by ZF Foxconn Chassis Modules (ZFFCN), a joint venture bringing together German automotive technology company ZF Friedrichshafen and Taiwanese manufacturing group Foxconn.
According to Bentley’s announcement, the purpose-built site will assemble complete front and rear axle systems for future vehicle programmes. It will also support the production of vehicles using different propulsion technologies, including internal combustion engines, plug-in hybrid systems and battery electric powertrains.
The development comes as Bentley continues to adapt its manufacturing operations to accommodate changing automotive technologies and customer requirements.
For professionals working in Management, Project Management and Logistics and Supply Chain, the development provides an example of how major manufacturers are reorganising supplier relationships, production facilities and component delivery operations to strengthen industrial efficiency.
Where Will the New Bentley Supplier Facility Be Located?
The new axle assembly facility is being established at Chatterley Park in Stoke-on-Trent, Staffordshire.
Its location is particularly significant because it will place an important component supplier considerably closer to Bentley’s principal manufacturing operations in Crewe.
Automotive Manufacturing Solutions reports that the distance between the two locations is approximately 17 miles. This geographical proximity will allow ZF Foxconn Chassis Modules to establish a more integrated relationship with Bentley’s production operations.
Under the planned arrangement, the facility will manufacture complete front and rear suspension modules before delivering them directly to Bentley’s production lines.
The project is designed around a just-in-sequence (JIS) manufacturing model. This approach involves supplying components in the required production sequence, allowing manufacturers to coordinate deliveries with vehicle assembly requirements.
Rather than operating as a conventional supplier located further away from the final assembly operation, the Stoke-on-Trent facility will form a more closely integrated part of Bentley’s manufacturing network.
As Nick Holt explains in Automotive Manufacturing Solutions, the development is intended to bring axle assembly, logistics and supply chain activities closer to Bentley’s existing manufacturing operations.
This arrangement is expected to support production coordination, quality control and responsiveness while reducing the operational distance between component assembly and final vehicle manufacturing.
The development also reflects a wider industrial trend towards supplier localisation, in which manufacturers seek to establish closer relationships with strategically important suppliers.
What Will the New ZF Foxconn Facility Manufacture?
The new facility will manufacture complete front and rear axle systems exclusively for Bentley Motors.
These components will support future Bentley vehicle programmes and form part of the wider suspension and chassis systems required for the company’s luxury vehicles.
According to the Bentley announcement, the facility will operate as a dedicated manufacturing location, with its production activities aligned closely with the requirements of Bentley’s Crewe operations.
The manufacturing arrangement will cover several propulsion technologies rather than concentrating on a single type of vehicle.
These include:
- Internal combustion engine (ICE) vehicles.
- Plug-in hybrid electric vehicles (PHEVs).
- Battery electric vehicles (BEVs).
This flexibility is important because Bentley’s future product portfolio is expected to include different powertrain configurations.
The facility’s ability to manufacture axle systems for these different vehicle programmes will allow the supplier relationship to continue as Bentley develops and introduces new models.
Automotive Manufacturing Solutions reports that the production of complete front and rear suspension modules will follow a just-in-sequence approach.
Under this arrangement, components will be delivered directly to the appropriate production lines in Crewe according to vehicle assembly requirements.
For manufacturers, this type of production coordination can help align component availability with assembly schedules and reduce the need for unnecessary handling or storage.
The facility will therefore play a role beyond component manufacturing, supporting the wider coordination of Bentley’s production and logistics activities.
How Does the Development Support Bentley’s Beyond100+ Strategy?
The Stoke-on-Trent project forms part of Bentley’s wider Beyond100+ transformation, which is intended to prepare the manufacturer for the changing requirements of the luxury automotive market.
Automotive Manufacturing Solutions reports that Bentley’s original Beyond100 strategy was established as a roadmap towards becoming an exclusively electric luxury car manufacturer.
The strategy was subsequently extended in 2024, moving the intended transition timeline from 2030 to 2035. Bentley also committed to introducing a new plug-in hybrid or battery electric model each year over the following decade.
However, the company has since adopted a more flexible approach to its electrification plans.
According to Nick Holt’s reporting, Bentley’s November 2025 strategy update confirmed that internal combustion and plug-in hybrid vehicles would remain part of its portfolio for longer.
The decision reflected changing customer demand and the slower development of charging infrastructure.
Bentley’s Sustainability Report, published in April 2026, subsequently confirmed that its original 2035 all-electric target would be extended. The company had not established a replacement date at the time of the Automotive Manufacturing Solutions report.
These developments mean Bentley’s manufacturing facilities and supplier network must be capable of supporting multiple powertrain technologies simultaneously.
The new ZF Foxconn facility is intended to provide that flexibility by manufacturing axle systems for internal combustion, hybrid and fully electric vehicle programmes.
This approach allows Bentley to maintain flexibility across its future vehicle portfolio without depending on a single propulsion technology.
Which Future Bentley Vehicles Will Benefit from the New Facility?
The new Stoke-on-Trent facility will support Bentley’s future vehicle programmes, including vehicles developed around different propulsion systems.
Automotive Manufacturing Solutions identifies the fourth-generation Continental GT and Flying Spur as part of Bentley’s current product range. Both use the manufacturer’s V8 plug-in hybrid powertrain.
The Bentayga SUV family and its derivatives also form part of the company’s existing portfolio.
A significant upcoming development is Bentley’s first fully electric model, the Torcal luxury urban SUV.
According to Automotive Manufacturing Solutions, the vehicle was scheduled for unveiling towards the end of 2026, with customer deliveries expected in 2027.
The Torcal will be designed, developed and manufactured in Crewe. It will represent a new model line rather than a direct replacement for an existing Bentley vehicle.
Further electrified products are expected to follow as the company develops its future portfolio.
The new ZF Foxconn facility will therefore provide a supplier relationship capable of supporting different vehicle programmes as Bentley continues to introduce new technologies.
Its ability to manufacture axle systems across internal combustion, hybrid and electric platforms is particularly relevant as the manufacturer balances its electrification ambitions with the continued demand for other powertrain configurations.
What Has Bentley Said About the New Manufacturing Investment?
Andreas Lehe, Bentley Motors’ board member for manufacturing, described the new facility as an important development in the company’s manufacturing strategy.
In the company’s announcement, Lehe said:
“Manufacturing excellence is fundamental to Bentley’s success. Every component that enters our Dream Factory must meet the exacting standards that define our vehicles, from quality and precision through to craftsmanship and performance.”
He explained that the facility would strengthen collaboration between Bentley and ZF Foxconn Chassis Modules.
“This new facility strengthens our ability to work closely with ZF Foxconn Chassis Modules to achieve those standards through greater integration, collaboration and manufacturing alignment,” he said.
Lehe also identified the project as the first cornerstone of Bentley’s ambition to bring key suppliers closer to its Crewe operations through the development of a future supplier park.
He added:
“As part of our UK localisation strategy, this investment demonstrates our commitment to strengthening the domestic supply base and supporting the long-term competitiveness of British automotive manufacturing.”
His comments underline the importance Bentley places on developing closer supplier relationships and strengthening the domestic manufacturing network.
Lehe further stated that maintaining the highest quality standards across its manufacturing network would remain a priority as the company developed its next generation of vehicles.
What Has ZF Foxconn Chassis Modules Said About the Project?
Ben Roos, chief executive officer of ZF Foxconn Chassis Modules, also welcomed the development and highlighted the company’s commitment to the British automotive manufacturing sector.
In Bentley’s announcement, Roos said:
“We are honoured to be Bentley Motors’ preferred chassis partner.”
He added that the investment demonstrated the company’s commitment to the UK and its confidence in the future of automotive manufacturing in one of the world’s most renowned luxury automotive markets.
Adrian Chell, ZFFCN’s plant manager in Stoke-on-Trent, also commented on the development.
He said:
“By laying the foundation for a state-of-the-art production facility here in Stoke-on-Trent, we strive to create long-term success, innovation, and sustainable growth with Bentley in the Midlands and beyond.”
The comments from both executives highlight the importance of the new facility to the supplier’s relationship with Bentley and its wider UK manufacturing activities.
Who Owns ZF Foxconn Chassis Modules and How Large Is Its Global Operation?
ZF Foxconn Chassis Modules is a 50:50 joint venture established in 2024 between Germany-based ZF Friedrichshafen and Taiwan-based Foxconn, also known as Hon Hai Technology Group.
The partnership combines ZF’s experience in automotive chassis systems with Foxconn’s manufacturing capabilities.
According to Automotive Manufacturing Solutions, ZFFCN operates 27 locations worldwide and employs more than 4,000 people.
The joint venture’s involvement in the Stoke-on-Trent development represents a further commitment to the UK automotive industry.
PistonHeads, in its 16 November 2026 report, Bentley to source its axles from Stoke-on-Trent, also identified ZF Foxconn Chassis Modules as the strategic supplier behind the new facility.
The publication highlighted the joint venture’s existing manufacturing presence in Solihull, illustrating its established involvement in the British automotive supply chain.
The new site will add another dedicated manufacturing location to its UK operations, with production specifically aligned to Bentley’s requirements.
How Does the New Facility Fit into Bentley’s Wider UK Investment Programme?
The development at Chatterley Park is part of a broader manufacturing transformation taking place at Bentley’s headquarters in Crewe.
Automotive Manufacturing Solutions reports that Bentley is investing in its Pyms Lane operations to create a more flexible and digitally enabled manufacturing environment for its next generation of luxury vehicles.
In October 2026, the company confirmed that its £350 million investment in the Crewe site was nearing completion.
The programme includes a new battery electric vehicle assembly line within the historic A1 factory building.
Originally constructed in 1938, the building has been repurposed to support electric vehicle production. Autonomous guided vehicles (AGVs) are being introduced to move vehicles through the manufacturing process.
The wider programme also includes several other developments:
- A new Design Centre, which opened in July 2025.
- An Excellence Centre for Quality and Launch.
- An Integrated Logistics Centre.
- A new paint shop designed to offer customers close to 100 paint colours while improving manufacturing efficiency and environmental performance.
These developments form part of Bentley’s broader £2.5 billion investment commitment in future products and its Crewe manufacturing infrastructure, announced under its Beyond100 transformation programme.
The objective is to maintain high-value vehicle manufacturing in the UK while introducing the technology, skills and production flexibility required to support electrification.
The Stoke-on-Trent supplier facility extends this investment approach beyond Bentley’s own manufacturing premises.
Instead of concentrating all manufacturing development within its existing factory, Bentley is seeking to establish a closer network of strategically located suppliers.
This approach is intended to strengthen the relationship between component production and final vehicle assembly.
Why Is Supplier Localisation Important for British Automotive Manufacturing?
The development highlights the growing importance of supplier localisation within the British automotive manufacturing industry.
For vehicle manufacturers, the geographical location of suppliers can influence production coordination, component availability, logistics planning and manufacturing responsiveness.
Establishing a dedicated facility approximately 17 miles from Bentley’s Crewe operations provides an opportunity to integrate component manufacturing more closely with vehicle assembly.
The just-in-sequence delivery arrangement is particularly relevant because it allows the supplier to coordinate component deliveries with the requirements of Bentley’s production lines.
It also provides a framework for closer cooperation between manufacturing teams, logistics operations and quality management functions.
For the wider automotive industry, the project demonstrates how investment in component manufacturing can complement investment in vehicle assembly facilities.
The transition towards electric vehicles is creating new requirements for manufacturers and their suppliers. However, Bentley’s strategy also illustrates why manufacturers need to retain the ability to support internal combustion and hybrid technologies during the transition.
The new facility is designed to accommodate these different requirements.
For professionals involved in Quality and Productivity, Project Management, Power Systems and Maintenance, and Logistics and Supply Chain, the development illustrates the operational considerations involved in coordinating specialist suppliers, manufacturing technologies and complex production schedules.
It also demonstrates the relationship between long-term industrial investment, supplier partnerships and the development of advanced manufacturing capabilities.
When Will the New Bentley and ZF Foxconn Facility Begin Production?
Construction has started at Chatterley Park in Stoke-on-Trent, with production scheduled to begin in 2027.
Once operational, the facility will assemble complete front and rear axle systems for Bentley’s future vehicle programmes.
The resulting suspension modules will be delivered directly to Bentley’s production lines in Crewe under the planned just-in-sequence manufacturing arrangement.
The development will form part of the manufacturing network supporting future Bentley vehicles and its broader supplier localisation strategy.
For ZF Foxconn Chassis Modules, the project represents a dedicated manufacturing relationship with one of the UK’s established luxury vehicle manufacturers.
For Bentley, it provides an opportunity to strengthen its domestic supplier base while developing the production flexibility needed to support its changing vehicle portfolio.
As the British automotive industry continues to adapt to electrification, changing customer requirements and advances in manufacturing technology, the Stoke-on-Trent development illustrates the role that strategic supplier partnerships can play in maintaining the UK’s position in luxury automotive production.
